INDISPRON^® D 110 - thought out from A to Z

• Mode of Action

The action of INDISPRON^® D 110 is based on a drying effect on contact with selected parasites and insects. Thanks to its largely physical mode of action, there is almost no risk of resistance build-up in the parasites. When applied in accordance with instructions, contamination of inhaled air is negligible. Further details are available in our material safety data sheet (MSDS), which can be downloaded from our 'Toxicology and Approval page'. 

Please click here to start the Video "Mode of Action and Application of INDISPRON^® D 110" ----> 

• Application 

INDISPRON^® D 110 is used undiluted. We recommend a dosage of approximately 0.1 to 0.2 litres per square metre. INDISPRON® D 110 should be sprayed onto all surfaces and is active after drying. To avoid long drying times, the room temperature should not be allowed to fall below 10°C and good ventilation should be provided.

INDISPRON^® D 110 is a viscous and stable dispersion that does not sediment and therefore does not need stirring. With the use of suitable equipment, the product can be sprayed without any problem. Because INDISPRON^® D 110 is viscous we recommend spray systems that ensure uniform transport and dispersion and do not negatively impact the quality of our INDISPRON^® D 110 . Diaphragm pumps or peristaltic pumps should always be used, and the spray pressure should not exceed 15 bar. We have tested various application units with the aim of achieving

• a long-lasting effect,
• high efficacy,
• complete coating of all surfaces, and
• high coating efficiency

We recommend the following pump and spray systems for application of INDISPRON^® D 110:

141 T

Gloria, Witten

Garden sprayer

Small surface areas

approx. 6 bar

< 66 l / h

5 l

F-55 MC16 

ZUWA- Zumpe, Laufen 

Diaphragm pump

Medium-sized units

7 - 9 bar

90 l / h

55 l

Inotec-System

Inotec, Waldshut

Peristaltic pump

Cage units

10 bar

40 - 360 l / h

120 l

Back